Download AnySim For Mac 1.1

Mac OS 7 was a major change from the earlier System Software, introducing integrated multitasking, a revamped desktop, networking, and transitioning the name from 'Macintosh System Software' To 'MacOS'.It was followed by MacOS 8.x. Running Mac OS 7.x requires a Motorola 68000 based Macintosh, a supported model of Power PC based Macintosh (7.1 or later) or one of the.

  • Forum thread Tutorial: iPhone 1.1.1 is free - configure int Keyboard, install apps and more Once you freed your iPhone to 1.1.1 with or without the use of an 'unlock' like Turbosim, you might wanna go the next steps.Its all here in the forum but on several places, so I compiled some next-steps-information.
  • 1.1 Overview With the help of SIMATIC S7-PLCSIM Advanced virtual controllers for the simulation of a S7-1500 or ET 200SP CPU are created and used for the comprehensive simulation of functions. This means that no real controllers are required to test a STEP 7 program.
  • A new version of iNdependence, 1.2.5, is now available. INdependence is the most widely used tool for jailbreaking and installing third party applications on iPhones running, or looking to upgrade to, iPhone firmware version 1.1.1. Like it's recently released Windows counterpart (of sorts), iDemocracy, iNdependence provides a great deal of automation to an otherwise lengthy and technical.
  • SIMUnlocker for Mac, free download. SIMUnlocker for Mac 1.1.0: Quickly unlock carrier locked iPhone and use any SIM card from any carrier worldwide on it. Once an iPhones carrier lock has been removed you can take it anywhere in the world and use local SIM cards on it.
Witam,
Here is another ultimate guide for the benifit of the community Special thanks to conceited software, tauw and all the others who worked on getting this working
Instrukcja: (UPDATED 16 tego listopada) (Spójrz na krok 6 przed rozpoczęciem)
Jakich plików będę potrzebował?
- Jailbreak Software 1.1.2 (NEW VERSION)
- iPhone 1.1.1. firmware file (opcjonalnie)
- iPhone Firmware v1.1.2 (opcjonalnie)

1.1.2 Jailbreak (Updated)
**** NOTE: Metoda wymaga byś miał na iPhonie firmware 1.1.1. Jeśli już używasz 1.1.2 musisz wykonać downgrade do 1.1.1. ****
Updates:
- Activation/YouTube for iPhones
- Added an automatic fix for SpringBoard crash problem on touches
- PPC support
- Some improvements to crossplatform compatibility
Step 1: Downgrade do 1.1.1 (jeśli potrzeba)
*** NOTE: This guide does not guarantee it will work 100%. Also errors 1015 is expected at
the end of the process. Continue reading to understand. ***
1. Download the 1.1.1 ipsw firmware file from Apple. If the downloaded file has the extension
'.zip', please remove it and modify it to end up with a filename ending in _Restore.ipsw
2. Reboot your iPhone holding the top (power) and home buttons BUT release the top button 10
seconds into it (right after the screen goes dark) and continue to hold the home button until
iTunes detects the phone in recovery mode. The iPhone screen will appear to be off, but start
iTunes if not started yet .
3. Restore your iPhone by pressing and holding the ‘Shift’ key on windows or ‘option’ key on Mac,
then click ‘restore’ to select the 1.1.1 firmware file you downloaded earlier. The restore should
go through and errors at the end with error 1015. However you will notice that the iphone is in
DFU mode with the connect to itunes screen from 1.1.1.
4. In order to kick the phone out of that mode I just had to launch iNdependence version 1.2.5
and wait a minute or so. If you are using iTunes 7.5 you will have to get a MobileDevice from a
previousv version in order to run Independence.
- If iNdependence is not available or you are on a Windows machine, download a working copy of
iPhuc and issue the following commands:
cmd setenv auto-boot true
cmd saveenv
cmd fsboot
----------------------------------------------------------------------------------------------------
Step 2a: Jailbreak 1.1.1 on Unactivated iPhone
*** NOTE: If your phone has been activated through iTunes, you can proceed to step 2b. ***
1. enter *#307# press call, now use the back button on the top of your screen to remove *#307# ,
now enter 0 , press call, press answer, press hold, press decline. And you get to the contact
list. And thereafter every time you push the homebutton you just slide the 'emergency call'
slide, then enter 0 , press call, press hold, press decline.
2. Push contacts, end call and you get called again, this time hit decline and you access one of
menus with favorites, you can edit contacts, do a test ride on keyboard, take photos etc.
3. Now edit a new contact and type in 'prefs://11' as web-address and 'http://jailbreakme.com' as
an additional URL.
4. When you tap 'prefs://11' you can now select your favorite WiFi gateway.
5. Now press the home button and move the slider to the dial-pad.
6. Now you can go back to the contact list by Dialing 0, push call, then answer, then contacts,
then hit the 'http://jailbreakme.com' web address you typed in.
7. Scroll down to the bottom, click 'Install AppSnapp'. Safari will exit and you'll return to your
springboard. Wait for the phone to reboot. You are now jailbroken. and are able to use
Installer.app.
----------------------------------------------------------------------------------------------------
Step 2b: Jailbreaking on iPod Touch or iTunes Activated iPhone
1. Launch Safari
2. Visit http://jailbreakme.com, Scroll down to the bottom, click 'Install AppSnapp'. Safari will
exit and you'll return to your springboard. Slide to unlock, you are now jailbroken. and are
able to use Installer.app.
----------------------------------------------------------------------------------------------------
Step 3: Prepare your 1.1.1 device for the Update
1. Launch Installer.app
2. Scroll down to Tweaks (1.1.1)
3. Select OktoPrep
4. Click Install
----------------------------------------------------------------------------------------------------

Download Any Sim For Mac 1.1 Free

Step 3b: Prevent SpringBoard crash on previous hacked iPod touches
If you have installed MobileMail on your iPod touch, there is a chance an update to 1.1.2 will
render your device inoperable until a restore. This issue can be prevented by switching Auto-Check
off.
- Go to General->Mail->Auto-Check. Set it to Manual.
If you forget to do this step and update, proceed with the jailbreak in step 5 (even though
SpringBoard is unusable) and we will fix it for you.
----------------------------------------------------------------------------------------------------
Step 4: Update to 1.1.2
1. Connect your device to your computer
2. Launch iTunes
3. Choose your device
4. Click Update

Download Any Sim For Mac 1.1 Pro

The sims 3 mac download - If update still shows 1.1.1 as being the newest version, you may download the 1.1.2 from an
Apple download server and shift-click (PC) or option-click (Mac) on 'Check for update' and
select the update you downloaded.
- DO NOT CLICK OR SHIFT-CLICK RESTORE: That will wipe the changes OktoPrep made.Sim
5. Wait forever for your device to update
----------------------------------------------------------------------------------------------------
Step 5: Jailbreak your iPod Touch or iPhone
WARNING: If your iPhone is unactivated, it will be factory 'hactivated' for you and YouTube enabled.
If this is not desired behavior, activate your iPhone with iTunes before proceeding.
1. Close iTunes
2. Connect your device to your computer
3. On Windows, double click on windows.bat, on Mac, double click on jailbreak.jar
4. Follow the on screen instructions.
----------------------------------------------------------------------------------------------------
Step 6: Unlocking 1.1.2
Note:
# This version of anySIM works only with 4.02.13_G baseband version and can be run on 1.0.2, or 1.1.1 jailbroken systems
* The only way your baseband will be 4.02.13_G while you're running 1.0.2 or 1.1.1 is if you updated then downgraded firmware.

1) Start at 1.0.2 or 1.1.1 or 1.1.2, do a fresh 1.1.2 RESTORE
This will load the new baseband firmware.
2) Now, RESTORE (downgrade) first to 1.1.1 and then to 1.0.2.
This will not alter the baseband firmware, so it will still be the 1.1.2 version
3) Now on 1.0.2, jailbreak and install anySIM 1.2.1u
4) Run anySIM 1.2.1u to unlock the phone. Although you are running fw 1.0.2 with a 1.1.2 baseband, the phone will work.
5) Now RESTORE to 1.1.1 again
6) Do a jailbreakme.com and use installer to fetch and run OktoPrep
7) Now do an UPDATE (not restore) to 1.1.2.

Download Any Sim For Mac 1.1 Full


If you restore instead of updating then oktoprep is wiped out and you need to redo the steps.
8) Run the UPDATED jailbreak software.
DO NOT RUN anySIM 1.2 under 1.1.2. It will not work properly and you risk corrupting your baseband.
Enjoy!

After approximately two and half months of hard work, the iPhone Dev Team have achieved their objective of unlocking the iPhone, they have just announced the free GUI based iPhone SIM unlock tool called 'anySIM' for complete freedom from AT&T.

The tool converts the lengthy and complicated hacking process that was released earlier in the week into a simple one-touch speedy unlocking process.

Update: iPhone Dev Team have released anySIM 1.0.2, more details available after the jump.

It has taken the iPhone Dev Team only 79 days to achieve their objective of unlocking the iPhone. This is what they had set out to achieve in their own words

'Unlocking the iPhone will allow any Sim card to be used in the iPhone which will cause an increase in sales and is a major goal for the team.'

Though they had already achieved partial victory earlier this week when they had released iUnlock, the source code for iPhone SIM unlocking tool it still wasn’t complete as it wasn’t for the faint hearted. (see iPhoneHacks.com, First free open source iPhone SIM unlocking application released)

The free GUI iPhone unlock tool no longer needs you to use command line or extract binary files; it is now a simple one-touch process once you have copied the PXL package to your iPhone. They have also cut the time down to max. 3-5 minutes from the 20 minutes it used to take earlier with the tool.

The installation process should get easier once the tool is added the very cool Installer.app iPhone application. Until then you could either use iBrickr (for Windows) or Breezy or iFuntastic v3 (for Mac) to load the PXL package to your iPhone.

As soon as they released the unlocking tool, there were some reports of people facing problems unlocking their iPhone due to some timing issue, however the good folks @ iPhone Dev team have already fixed the problem in version 1.0.1 of the tool.

There are still couple of known issues with the hack; the visual voicemail feature does not work as you need AT&T for it to work and people have reported problems using YouTube on their unlocked iPhone. So stay tuned @ iPhoneHacks.com for a workaround for these two known issues.

The source code has not been released and is expected to be released in a few days to prevent it being used for commercial gains.

Congratulations iPhone Dev Team on achieving a great milestone, today is your day!

Here is the link, to download the latest and greatest opensource Unlock tool and follow this link
for a step by step guide posted by 'Sti' one of the iPhone dev team’s
testers. But as always remember you will be using the unlock at your
own risk[ as here is the disclaimer 'The iPhone Dev Wiki is not responsible if you void your warranty or damage your device.'

Don’t forget to tip them for their effort towards achieving SIM freedom. Follow this link for more details on how to donate to the iPhone Dev Team.

Update (30th September):

Update 2 (27th September):

It is advisable not to try this for now, read Breaking News: iPhone Firmware Update 1.1.1 unlocks iTunes Wi-Fi Music Store BUT seems to Partially Brick Unlocked iPhone for more details.

Update (27th September):

Actually Chris raises a valid concern, before you go ahead and try
to unlock your iPhone, it would be a good idea to read this article to
understand the risks:

Thanks Chris for highlighting it, I should have mentioned it in yesterday’s update.

Update (26th September):

The iPhone Dev team have release new version of free GUI based
iPhone SIM unlock tool anySIM 1.0.2 in which they have fixed lots of
bugs and also optimized the unlock process further. However, the best
part of this update is that you can now install it on your iPhone using
the cool Installer.app. So if you are one of those who tried to unlock
your iPhone using anySIM 1.0.1 and faced problems then you can check
the latest version of the unlock tool.

In order to install 'anySIM' on to your iPhone using Installer.app use the appropriate links below:

Update (19th September):

For all those who are having issues with anySIM, the best way to get
your issues resolved would be to contact the iPhone Dev team
themselves. You can get in touch with them either on IRC or on their
forum, the details are mentioned below:

IRC: #iphone @ irc.osx86.hu
Forum:http://hackint0sh.org/forum/forumdisplay.php?f=123

Update (16th September):

iPhone Dev Team have compiled a list of 42 countries and 90 national carriers for which the free iPhone SIM unlock has been successfully tested. And as you would expect the list is growing fast. You can get more details if someone has already tested for the carrier you are interested in at this link.

[via iPhone Dev Team – won’t link to the iPhone Dev community in accordance to their request, Google them]

Rate this post:

You might also be interested in reading about the following killer iPhone applications:

WebEx’s PCNow brings Corporate Email, Skype via remote desktop
Native iPhone App 'Connect' makes it easier to login to Wi-Fi Hotspots with your iPhone
Edit, Format and Share Word Documents using your iPhone with Glide Mobile